GAS HEATING FURNACES Monster Energy Drink Facts To The Already.;I'd rather buy Clomid now hehe Блог о лекарственных растениях и травах
The furnaces specially designed for work on gas, are most economic and
create the greatest conveniences to the population. Besides, it is easier to equip
these furnaces with automatics completely. We will consider some designs of these
furnaces. 
In wall furnace AKH-14 full tank in case of installation of torches for a continuous
fire chamber spread from a red brick, a thickness 1/2 bricks. At installation
in the furnace of torches of periodic action of a wall full tank spread from a
fire-resistant brick.
In the top part full tank establish a lattice from a
fire-resistant brick which in an operating time heats up and radiates heat on
walls full tank. Thus, full tank heats up more than other zones of the furnace,
and it promotes uniform heating of a premise on height. viagra online
Smoke channels of the furnace are formed by the bricks put in three circles
one over another. Such system of direct-flow channels provides developed a surface
on a short way of products of burning. In the centre of ascending streams of smoke
gases three numbers which direct burning products to lateral walls of the furnace
are located one over another. Dissecter are executed from the bricks put "on
a die".
Such system of flues creates uniform heating of the furnace on
perimetre. Over the top modular flue it is established draughtbreaker which serves
for protection of the furnace from superfluous and return draught. Besides, through
draughtbreaker, located on a forward wall, there is a constant aeration of a premise.
The furnace place indoors so that the fire chamber with left towards an uninhabited
premise, a corridor or kitchen.
To heat the furnace AKH-14 at installation
of torches of periodic action it is recommended no more than 2 h, and in strong
frosts - 2 times a day. Can bake to be executed one-storeyed and two-storeyed.
At
work of the furnace with torches of continuous action the size of the warmed area
can be increased by 30 %.
The furnace AKH-SM-1 is calculated on a continuous mode of a fire chamber
and designed for factory manufacturing. It deliver in a ready kind in apartment
houses and establish without the base. The furnace case is executed from pipes.
From below and from above the furnace case is closed by stamped covers which have
a thermal protection.
Full tank furnaces not футеруют a fire-resistant brick
as its internal surface does not heat up above 250 ° With. In the bottom zone
of the furnace establish a torch of continuous action АКХ-СМ-3 and a metal branch
pipe for air giving in full tank. For supervision over burning in the bottom part
of the furnace the observation port is located. Over a torch the metal hollow
chamber is established.
Burning products rise upwards on the concentric channel
between the case of the furnace and the metal chamber and transfer heat to furnace
walls. Burning products pass in the top zone in gascollector and, passing door,
through a steel connecting branch pipe get in a flue. Air giving in the furnace
regulate door, established directly ahead of a target branch pipe.
Together with the furnace deliver a temperature regulator for maintenance
of the set temperature of air indoors, established on a bringing gas pipeline.
To
tap of products of burning apply pipes which can be established in corners of
premises or in partitions between premises. On an attic and over a roof pipes
warm. It is the most expedient to attach furnaces not to isolated, and to the
general flues. To one асбестоцементной the pipe with internal diameter 100 mm
can attach four furnaces, and to a pipe with internal diameter 150 mm - six.
Operating
experience of these furnaces has confirmed their high temperature technical indicators.
Recently we Offer a variant of furnace AKH-SM-2 having big temperature in comparison
with considered above. On a design and the sizes it differs from furnace AKH-SM-1
a little. |
